Schematic illustration · not product imagery

Razer DeathAdder Essential

The DeathAdder Essential uses Razer’s familiar right-handed ergonomic shell and a 6,400 DPI optical sensor. Its official page describes five Hyperresponse buttons and mechanical switches rated for ten million clicks. The design provides a simpler control layout than multi-button MMO mice. This entry specifically covers the Essential model, not the DeathAdder V3 family. Dimensions, weight and reporting rate are left unassigned where the inspected source does not establish them, and no hands-on verdict is implied.

Research-based review

Last reviewed: Not reviewed yet · 3 sources

Weight: 96 g
Sensor: True 6400 DPI optical sensor
Polling Rate: Not verified
DPI: 6400
Battery: Not verified
Connection: Not verified

Specification conditions: Essential only; no V3-family specifications transferred. Exact connection specification, lighting type, mass and dimensions require official manual confirmation. Content completion 2026-10-03: RZ01-03850 support specifications: approximate L127 × W61.7 × H42.7 mm,96 g excluding cable, up to220 IPS/30 G. Manufacturer gives generic True6400 DPI optical sensor; no unsupported PixArt chip name. Single-colour green/white lighting is not RGB. UNRESOLVED polling and remaining connection details pending exact manual verification.

Compare this mouse ⇄Where to Buy ↗

Research-based coverage. Specifications, sourced assessments, and editorial views are kept distinct. No hands-on testing is claimed on this page. How we review ↗

EVIDENCE BEFORE VERDICTS

Research-Based Review

Overview

Research content not published yet.

Pros

Research content not published yet.

Cons

Research content not published yet.

Best For

Research content not published yet.

Who Should Avoid

Research content not published yet.

Hand Size

Research content not published yet.

Grip Style

Research content not published yet.

Game Compatibility

Research content not published yet.

Detailed Specifications

Essential only; no V3-family specifications transferred. Exact connection specification, lighting type, mass and dimensions require official manual confirmation. Content completion 2026-10-03: RZ01-03850 support specifications: approximate L127 × W61.7 × H42.7 mm,96 g excluding cable, up to220 IPS/30 G. Manufacturer gives generic True6400 DPI optical sensor; no unsupported PixArt chip name. Single-colour green/white lighting is not RGB. UNRESOLVED polling and remaining connection details pending exact manual verification.

DeathAdder Essential detailed specifications
Brand	Razer
Model	DeathAdder Essential
Series	DeathAdder
Release date	Not verified
Weight	96 g
Length	127 mm
Width	61.7 mm
Height	42.7 mm
Sensor	True 6400 DPI optical sensor
Maximum DPI	6400
IPS	220
Acceleration	30 G
Polling rate	Not verified
Switch type	Razer mechanical switches
Encoder	Not verified
Connection	Not verified
Wired	Not verified
Wireless	Not verified
Bluetooth	Not verified
Buttons	5
Battery life	Not verified
Charging	Not verified
Handedness	right
RGB	Not verified
MSRP	Not verified

Where to Buy

No verified merchant offers have been added.

Alternatives

Other mice to explore; inclusion does not imply equivalent performance or a recommendation.

Illustration · not product imagery

SteelSeries

Aerox 3 Wireless (2022 Edition)

The SteelSeries Aerox 3 Wireless 2022 Edition is a perforated-shell gaming mouse offered in Onyx and Snow finishes. This record covers the Onyx wireless revision, not the original Aerox 3 or the later Gen 2 model. SteelSeries specifies a 68 g design, a TrueMove Air sensor and Golden Micro IP54 switches. It supports 2.4 GHz wireless and Bluetooth connectivity, with configurable three-zone RGB lighting. The manufacturer advertises up to 200 hours of battery life, but mode-specific conditions still require confirmation.

68 gPolling —

PublishedCompare ↗

Illustration · not product imagery

SteelSeries

Aerox 9 Wireless

The Aerox 9 Wireless is SteelSeries’ multi-button MMO and MOBA mouse with a manufacturer-listed weight of 89 grams. Its twelve-button side panel and tilt-click wheel are paired with the TrueMove Air sensor, supporting up to 18,000 CPI. Radio and Bluetooth connectivity sit alongside a detachable USB-C cable. Golden Micro IP54 switches and three-zone RGB lighting complete the documented hardware. Battery estimates depend on operating conditions; the quoted maximum should not be interpreted as a continuous high-rate gaming guarantee.

89 gPolling —

PublishedCompare ↗

Illustration · not product imagery

LAMZU

ATLANTIS MINI 4K

The LAMZU ATLANTIS MINI 4K uses a smaller 117 by 63 by 37 mm body than the OG V2 4K. Its manufacturer specification graphic lists a nominal 51 g weight with a two-gram tolerance, a PixArt 3395 sensor and sensitivity up to 26,000 DPI. Wired and wireless operation are supported, and the documented package includes a 4K receiver and USB-C cable. Huano transparent blue-shell pink-dot switches and a Silver TTC encoder are listed for this specific Mini generation.

51 g4000 Hz

PublishedCompare ↗

Sources

DeathAdder Essential RZ01-03850 support specifications ↗
Razer · OFFICIAL · Accessed 10/3/2026
Source checked: 10/3/2026 · Verified
RZ01-03850 support specifications: approximate L127 × W61.7 × H42.7 mm,96 g excluding cable, up to220 IPS/30 G. Manufacturer gives generic True6400 DPI optical sensor; no unsupported PixArt chip name. Single-colour green/white lighting is not RGB. UNRESOLVED polling and remaining connection details pending exact manual verification.
DeathAdder Essential official product specifications ↗
Razer · OFFICIAL · Accessed 10/3/2026
Source checked: 10/3/2026 · Verified
Essential only; no V3-family specifications transferred. Exact connection specification, lighting type, mass and dimensions require official manual confirmation.
Independent model review ↗
RTINGS · REVIEW · Accessed 10/3/2026
Source checked: 10/3/2026 · Verified
Accessed model review for identity and context; no paywalled measurements copied.

FAQ

No researched questions and answers have been published yet.