AI illustration of Endgame Gear OP1w 4k v2; visual reference, not an official product photoIllustration

Illustrative image for visual reference. Actual product appearance may vary.

Endgame Gear

Endgame Gear OP1w 4k v2

The OP1w 4k v2 puts a narrow claw-oriented shell and replaceable mechanical main switches ahead of extra controls. It combines receiver-based wireless input with a documented maximum 4,000 Hz reporting rate. EloShapes' hands-on review describes flat sides and a rearward palm contact point, while the existing manufacturer record gives an approximately 59.5 g body. Sensor identity and maximum DPI remain unconfirmed because the earlier official specification capture contradicted itself; that uncertainty should be resolved before a sensor-led purchase.

Research-based review

Last reviewed: · 3 sources

Weight
59.5 g
Sensor
Not verified
Polling Rate
4000 Hz
DPI
Not verified
Battery
30 hours
Connection
Wired / Wireless receiver

Specification conditions: Approximately 59.5 g manufacturer mouse weight. Earlier official descriptions conflict on sensor identity and maximum DPI; those fields remain unconfirmed. Battery: up to 30 hours at 4K/default power saving. Physical button total and Bluetooth are not established.

Research-based coverage. Specifications, sourced assessments, and editorial views are kept distinct. No hands-on testing is claimed on this page. How we review ↗

EVIDENCE BEFORE VERDICTS

Research-Based Review

Overview

Endgame Gear's OP1w 4k v2 approaches competitive control through a compact, narrow shell rather than a large ergonomic rest. The manufacturer dimensions recorded for this model are approximately 118.2 by 60.5 by 37.2 mm. EloShapes describes its flat sides and moderate rear hump, and reports that a large-hand claw grip can still work on this small body. A single reviewer's comfort is useful shape evidence, but it cannot establish universal hand-size suitability.

Wireless reporting reaches 4,000 Hz in the documented configuration. This reduces the nominal interval between reports compared with 1K, while adding a battery and system-load decision. The retained manufacturer battery claim is 30 hours at 4K with default power saving. Buyers who want a long receiver-only charging interval should weigh that condition against the practical value of a higher reporting rate. The official download page provides model-specific Windows firmware and configuration tools, so the v2 identity matters when preparing software.

Kailh GX mechanical switches and an accessible replacement design are more distinctive ownership features than a DPI headline. EloShapes' physical review supports the replaceable-switch description. This page nevertheless leaves the sensor and DPI fields empty: the earlier official capture mixed PAW3395 and PAW3950 descriptions, and an independent identification does not silently settle a manufacturer inconsistency. The OP1w can be shortlisted for its documented shell and controls while that particular specification remains under review.

Pros

  • Narrow 60.5 mm documented body offers a different contact profile from wider symmetrical mice.
  • Mechanical main switches can be replaced using the documented accessible assembly.
  • 4,000 Hz wireless reporting is available without a permanently attached input cable.

Cons

  • Documented 30-hour runtime is specifically a 4K/default-power-saving claim.
  • Sensor identity and maximum DPI remain unsettled in the retained official evidence.

Best For

A claw user who deliberately prefers straight, narrow sides has a concrete reason to examine this model. The independent shape review is especially relevant when a small shell does not automatically mean a small-hand-only mouse. Competitive shooters can use the compact control arrangement while leaving abilities on the keyboard; that is a more plausible role than replacing a many-button MMO mouse. The wireless version also suits someone who wants room to reposition without managing a permanent cable and is willing to charge around the documented 4K runtime. Compare the OP1's rear contact point with a mouse you already find comfortable. Switch accessibility adds value mainly if maintaining or changing mechanical main switches is part of your ownership preference.

Who Should Avoid

Players needing a confirmed sensor model on the purchase record should wait for an official clarification rather than accepting the most attractive interpretation of conflicting text. A long, fully supported palm hold may call for the DeathAdder V3 Pro's sloped shell instead. Someone happy with a cable can examine the OP1 8k v2, which removes the wireless battery routine and has its own distinct specifications. Bluetooth availability is not confirmed for this entry; do not select it for receiver-free multi-device work. A thumb-grid user should choose an actual MMO layout, not this compact aiming-oriented body.

Hand Size

EloShapes describes a small shell that its large-hand reviewer could use in claw grip. That observation supports a conditional fit discussion across hand sizes, not an exact small/medium/large rating. The narrow sides may matter more than overall length when comparing finger spread.

Grip Style

Claw is the strongest documented direction for this OP1. Flat side walls and the rear contact area are the relevant features. Fingertip use is discussed in the independent review, but a palm recommendation for every hand would go beyond the available evidence.

Game Compatibility

Aim-focused games are the natural context for the compact shell and 4K option. Repeated MMO commands remain better served by a thumb grid. Reporting rate does not determine whether a particular player will prefer the shape in Valorant or CS2.

Connectivity & Battery

The existing specification record confirms wired and receiver-based wireless modes, with up to 4,000 Hz wireless reporting. Its 30-hour manufacturer battery figure applies at 4K with default power saving. Bluetooth and a precise charging specification are not confirmed here. Use the model-specific official Windows downloads rather than firmware for an earlier OP1.

Detailed Specifications

Approximately 59.5 g manufacturer mouse weight. Earlier official descriptions conflict on sensor identity and maximum DPI; those fields remain unconfirmed. Battery: up to 30 hours at 4K/default power saving. Physical button total and Bluetooth are not established.

OP1w 4k v2 detailed specifications
BrandEndgame Gear
ModelOP1w 4k v2
SeriesOP1w
Release dateNot verified
Weight59.5 g
Length118.2 mm
Width60.5 mm
Height37.2 mm
SensorNot verified
Maximum DPINot verified
IPS750
Acceleration50 G
Polling rate4000 Hz
Switch typeKailh GX mechanical
EncoderKailh dustproof
ConnectionWired / Wireless receiver
WiredYes
WirelessYes
BluetoothNot verified
ButtonsNot verified
Battery life30 hours
ChargingNot verified
HandednessNot verified
RGBNot verified
MSRPNot verified

Where to Buy

No verified merchant offers have been added.

Compare this fit with a Mouse Finder shortlist ↗

Alternatives

Selected for specific differences in shape, connectivity or controls. Editorial selection is independent of merchant commission.

AI illustration of Endgame Gear OP1 8k v2 (Raw Input Edition); visual reference, not an official product photoIllustration

Endgame Gear

OP1 8k v2 (Raw Input Edition)

OP1 8k v2 Raw Input Edition is a narrow wired competitive mouse with replaceable Kailh GX mechanical main switches, PAW3950 and a dustproof Kailh encoder. Official dimensions are approximately 118.2 by 60.5 by 37.2 mm, with a 49.5 g claim whose cable basis is unstated. The standard v2 review provides related shape context; official support confirms shared core hardware. The inspected standard official page contradicts itself on maximum CPI, so that field remains empty. Wired8K avoids a receiver or battery purchase, but retains the practical requirement to manage a cable.

49.5 g8000 Hz
PublishedCompare ↗

Consider the wired OP1 variant to avoid battery charging and compare its separately documented 8K input configuration.

AI illustration of Pulsar X2v3 Medium; visual reference, not an official product photoIllustration

Pulsar

X2v3 Medium

The medium X2 v3 combines a wide-waist, low-hump symmetrical shell with Pulsar's XS-1 sensor and optical main switches. Manufacturer dimensions are 120.4 by 63 by 38 mm, with 52 g plus or minus 1 g excluding cable. Standard reporting is 1K; 8K requires the separately purchased compatible receiver. Pulsar positions the shape toward claw and fingertip use and provides Windows configuration. Exact battery, physical-button and additional connection details remain unconfirmed rather than being copied from X2 Mini, eS or CrazyLight variants.

52 g8000 Hz
PublishedCompare ↗

Compare the medium X2V3 when a different symmetrical shell width is more important than retaining the OP1 contact profile.

AI illustration of Razer DeathAdder V3 Pro; visual reference, not an official product photoIllustration

Razer

DeathAdder V3 Pro

The DeathAdder V3 Pro combines a sloped right-handed shell with a lightweight rechargeable design for aim-focused gaming. This entry covers the original black Classic Base edition, specified at 63 g excluding its cable, with a Focus Pro 30K sensor and Gen-3 optical main switches. High-rate wireless reporting requires an optional HyperPolling receiver. Its relatively large shape and small button layout make it a different ergonomic choice from a symmetrical Viper or a multi-button Naga.

63 g8000 Hz
PublishedCompare ↗

The sloped right-handed DeathAdder shell is a relevant alternative when a narrow symmetrical claw body does not provide the palm support you want.

Sources

  1. Endgame OP1w 4k v2 hands-on review ↗

    EloShapes · PROFESSIONAL_REVIEW · Accessed 10/3/2026

    Source checked: 10/3/2026 · Verified

    Actual review inspected for flat-sided shape, claw fit and replaceable main switches. Its sensor identification is not used to override the contradictory official capture.

  2. OP1w 4k v2 official software and firmware downloads ↗

    Endgame Gear · OFFICIAL · Accessed 10/3/2026

    Source checked: 10/3/2026 · Verified

    Model-specific Windows configuration and firmware page accessed. Earlier official product specification conflict remains unresolved; current parsed product page omits its specification detail.

  3. OP1w 4k v2 official product specifications ↗

    Endgame Gear · OFFICIAL · Accessed 10/3/2026

    Source checked: 10/3/2026 · Verified

    Dimensions approximate; 59.5 g cable basis unspecified. Official intro says PAW3395, feature section and table say PAW3950; sensor withheld pending clarification. Included 4K dongle. Battery approximately 30 h at 4000 Hz with default power saving. 5+2 controls includes power slider, so button_count null. OP1we deferred for contradictory polling/connection data. UNRESOLVED sensor: official introduction says PAW3395, while headline, feature section and technical table say PAW3950. Maximum CPI withheld while sensor identity conflicts. Manufacturer explicitly emphasizes claw grip and allows varied finger placement; this is qualitative positioning, not a measured compatibility rating. UNRESOLVED physical button count: table 5+2 includes a power slider; no inferred total. Existing approximate dimensions and conditional 30 h at 4000 Hz retained.

FAQ

Is the OP1w 4k v2 sensor confirmed here?

No. The retained official capture contains conflicting sensor descriptions, so sensor and maximum DPI remain empty pending clarification.

Can its main switches be replaced?

Yes. The independent physical review describes the accessible replacement design and Kailh GX mechanical switches.

What does the 30-hour battery figure mean?

It is the documented manufacturer claim at 4,000 Hz with default power-saving settings, not a guaranteed result at every configuration.

Is this the same as the wired OP1 8k v2?

No. The wired model has separate power, reporting and weight specifications and its own database entry.